HAT901-L series latching spdt relays & electronics int'l. corp. tel:(516) 328-9292 fax:(516)326-9125 www.hascorelays.com email:info@hascorelays.com features coil coil power 1200mw coil data at 25 c characteristics dielectric strength unit weight reacting time (at nomi. volt.) insulation resistance between coil & contacts between open contacts resetting time (at nomi. volt.) humidity ambient temperature shock resistance functional destructive vibration resistance construction 15ms max. 10ms max. 1000m
at 500vdc 1500vac 1min -20 c ~ +85 c 10hz to 55hz 1.5mm da approx. 26g 2000vac 1min notes: the data shown above are initial values. contact ratings contact arrangement contact resistance contact material contact rating(resistive) max. switching voltage max. switching current max. switching power mechanical life electrical life 1a a 1c 50m 1a 24vdc
110 7 times 110 5 times 98% rh,40c sealed, covered 98m/s 2 980m/s 2 ordering information model file no.:e75887 patent no.:201120133518.4 hat f 901 c s 30 dc12 - l - xxx 901:pcb pins only c:covered s:sealed l:latching lr=reverse polarity a:spst-no c:spdt nil:40a 30:30a 30/40a 277vac 30a/28vdc 277vac/28vdc 40a 7200va/560w 5 6 9 12 24 21 30 67.5 120 480 4.0 4.8 7.2 9.6 19.2 100 100 100 100 100 nominal voltage vdc impulse width ms coil resistance 10% 48 38.4 100 1920 this datasheet is for customers' reference. all the specifications are subject to change without notice. c large switch capacity up to 40a c green energy saving action/reset voltage vdc customer code 30,40 amp coil voltage 37 f:class f nil:class b note:this relay do not have pin 6. agsno siiver aiioy
relays & electronics int'l. corp. tel:(516) 328-9292 fax:(516)326-9125 www.hascorelays.com email:info@hascorelays.com unit: inch mm
outline dimensions pcb layout (bottom view) this datasheet is for customers' reference. all the specifications are subject to change without notice. HAT901-L series latching spdt outline dimensions, wiring diagram and pc board layout. remark 1) in case of no tolerance shown in outline dimension: outline dimension 1mm,tolerance should be 0.2mm; outline dimension # 1mm and 5mm,tolerance should be 0.3mm;outline dimension # 5mm, tolerance should be 0.4mm. 2) the tolerance without indicating for pcb layout is always 0.1mm. safety approval ratings notice 1.relay is on the ?reset? or ?set? status when being released form stock, with the consideration of shock risen from transit an d relay mounting, relay would be changed to ?set? or ?reset? status, therefore, when application (connecting the power supply), plea se reset the relay to ?set? or ?reset?status on request. 2.in order to maintain ?set? or ?reset? status, energized voltage to coil should reach the rated voltage, impulse width should be 5 times more than ?set? or ?reset? time. do not energize voltage to ?set? coil and ?reset? coil simultaneously. long energized time (more than 1 min) should be avoided. 30,40 amp 1.079(27.4) .692(17.6) .496(12.6) 1.252(31.8) .764(19.4) .862(21.9) .102(2.6) .189(4.8) .775(19.7) .169(4.3) 3- 2.1 .299(7.6) .598(15.2) .1(2.54) .149(3.8) 2- 1.1 .701(17.8) .402(10.2) 5 4 1 2 3 - + 5 4 1 2 3 + - 5 4 1 - + 5 4 1 + - 1a 1c 4 1 2 3 - + 4 1 2 3 + - 4 1 - + 4 1 + - 38 wiring diagram (bottom view) straight polarity reverse polarity 2 3 2 3 2 3 2 3 ul&cul 1hp/120vac, 2hp/277vac, 2hp/240vac 20a/277vac ballast, 30a/120vac ballast 2hp/277vac, 1hp/120vac 10a/277vac ballast, 2a/120vac tungsten no nc
|
